If there is a large area of damage to the invisible car cover, it needs to be torn off and reapplied, or if it turns yellow or has a poor texture after use, it can also be torn off and reapplied. So how to tear off the invisible car cover?
1. The invisible car cover consists of two parts: a film surface and a bonding surface. The adhesive side is attached to the car paint, so when tearing, the first step is to start from the edge, find the seal, and then peel off the edge. A good invisible car cover is basically wrapped, which is relatively easy to peel off. If there is no wrapping or it is difficult to tear off, you can use a baking gun to heat it up before tearing.
2. After starting the edge, slowly tear it along the edges and corners. Note that it is easier to peel it off when the indoor or outdoor temperature reaches 26 ℃ or above. If the temperature conditions are not met, you can use the method of heating while tearing off the invisible car cover. Repeat the operation and peel off the invisible car cover on each side.
3. After tearing off all the invisible car covers, pay attention to whether there are any adhesive marks left. Good invisible car covers will not leave any marks. If there are any, you can spray them with glue remover, alcohol, etc., and then wipe them off with a towel.
